13
2021-08
1. Flagpole characteristics 1, The stainless steel tapered flagpole is formed in one piece and is tapered and has no variable diameter cut. The taper rises and stands tall and magnificent; the ring-shaped hair is smooth and flat, and the color is uniform. 2, 360-degree downwind steering device, which can make the flag rotate according to the change of the wind direction, so that the flag is not entangled and remains unfolded forever. 3, Stainless steel lifting flag rope built-in structure, not easy to damage, will not fall off, and make the appearance bright and smooth. 4. The flagpole is made of 304 stainless steel, which has high strength and can withstand strong winds above level 12. 2. Flagpole height 1, Relevant departments and the military generally use an iconic flag pole whose height cannot exceed 30 meters, and the general height is between 12 meters and 28 meters. 2, The square flagpole is generally between 18 meters and 29.8 meters in height. 3, Sports flagpoles generally have a height between 9m and 15m. 4, Hotel flagpoles must be both luxurious and solemn. Generally, the height is between 12 meters and 19.8 meters. Generally, there are five iconic flags in the middle, and the two sides are actually the iconic flags of the country or the hotel's own flag. 5, The school flagpole generally uses a flagpole to raise the iconic flag of China, and the height is between 12 meters and 15.8 meters. 6. Remote control lifting, synchronized with the flag raising song, manual lifting can also be done if the power is off. Three, the pitch of the flagpole The distance between the flagpole and the flagpole is generally greater than or equal to the width of the flag. If there are more flagpoles, the distance can be appropriately reduced. Four, installation and commissioning In order to prevent unnecessary losses, please professional installation and debugging. 5. Flagpole maintenance service We provide you with services of maintenance, maintenance and repair of flagpoles.
2021-08-13
13
2021-08
Different countries have their own distinctive signs and representative things, including the national flag. The national flag can be said to be the spiritual symbol of a country. Whether it is in front of the building of a national unit or a company collective, you can see towering flag poles standing in front of the building, which is awe-inspiring. When we saw this scene, did we ever think about how the flagpole came from? What is its historical development? The origin of the flagpole and its development history. Use of flagpoles: Flagpoles are used in various mines, enterprises and institutions, living quarters, stations, customs wharves, schools, stadiums, high-end hotels, city squares, etc., as a kind of identification and set up. The flagpoles are professional flagpoles with water injection flagpoles. , Knife flag flagpole, stainless steel electric flagpole, stainless steel tapered flagpole, variable diameter flagpole, indoor flagpole, square flagpole, roof flagpole, etc. So how did it come about? The origin of flagpole: In the beginning, flagpoles were used to occupy territories between tribes. In layman's terms, it means to stand the flagpole on the place of residence, so that this piece of land is owned by our tribe. In feudal society, ancient officials and eunuchs would also set up a flagpole in front of the Taimen, representing the prosperity of the family business and the distinguished status. It is said that the farther the flagpole is from the Taimen, the greater the official position. Under normal circumstances, people can only erect flagpoles on the heels of the walls on both sides of the Taimen. After being recruited among the talents, returning to the hometown of Rongzong Yaozu, he usually needs to build a house and build a house. Among those with excellent grades, there is a plaque with the inscription "Wen Kui" or "Wu Kui" in gold, and a flagpole is erected at the door to show their glory. With the evolution of the times and the progress of human civilization and society, this tall and tall logo is gradually upgraded to a flagpole made of stainless steel and pure aluminum alloy. Modern stainless steel flagpoles are widely used, and flagpoles are used in schools, government agencies, shopping malls and many other industries.
2021-08-13
13
2021-08
Teach you how to install a stainless steel tapered flagpole
1. Install Shunfeng Ball Components 1. If the head of the steel rope has burrs, cut off a little with pliers, and try to make the head of the steel rope as neat as possible. 2. Then insert the steel rope into the small hole of the crown seat, insert the steel rope in until there is a steel rope coming out of the center of the downwind base, and then grab the steel rope and pull out more of the steel rope. 3. Attach a weight with a diameter smaller than that of the flagpole to ensure that it can slide to the bottom when the flagpole is erected. 4. Finally, use 4 M5X10 stainless steel bolts to fix the downwind ball assembly to the top of the flagpole to ensure that the downwind ball can rotate flexibly. Two, erect a flagpole 1. For flagpoles with lower height and lighter weight, the use of cranes can be manually installed according to the actual situation. Install the flagpole on the base. Screw on four nuts to fix the flagpole. 2. Use four screws to calibrate the verticality of the flagpole. Three, install the flag components 1. Put a lock on the steel rope outside the flagpole for use. Pass the head of the steel rope down through the small hole on the upper end of the flag-hanging piece, pass the flag-hanging piece and then wear a lock, tie the steel rope to one end of the tension spring, and pass the head of the steel rope into the lock in the opposite direction , Tighten the lock, and cut off the excess steel rope. Temporarily tie the hanging flag to the flagpole. 2. Install the lower end of the flag piece to untie the knot of the prayer beads, and put the prayer beads on the flagpole. Then connect the prayer beads to the lower end of the flagpole. 3. When hanging, make the angle between the bead and the flag pole greater than 45 degrees. Four, manual device component installation 1. At the appropriate height of the flagpole, generally about 1.2m from the horizontal, there is a rectangular window (installed at the factory). Unscrew the three screws of the manual device assembly, and reach into the window to pull the cable out. 2, use a small hammer to secure the head of the cable and the fixing hole. 3. Put the cable connector made in the previous step through the keyhole and place it on the rolling position of the manual device. Please pay attention to the direction of the cable and tighten it. 4. Put the manual device into the flagpole and lock three screws. Five, debugging 1. The function and use of the crank: This system uses a hand-controlled crank to raise and lower the flag, and use the crank to operate during normal work. There are "down, "up" on the hand control panel, Basic usage: "Raise" and "Lower" correspond to the two actions of raising and lowering the flag. Pull out the crank to realize the stop function. 2. Align the mouth of the crank handle with the manual device assembly, insert it, and turn it clockwise and counterclockwise. If it is stuck or rotates hard, please check whether there is a cable in place or entangled inside. 3. Follow the signs "up" and "down" on the panel, shake the handle, and observe whether the rising and falling directions of the flag (or hanging flag) are uniform. Precautions: 1. When hoisting the flagpole, please be careful not to scratch the flagpole, so as not to affect the appearance. 2, the length of the cable should be moderate, too long, easy to twist. 3. The flagpole is raised to the top, and must not continue to rise with brute force. 4. Please take off the flag if it is not used for a long time, and then raise the flag to the top. 5. When the flag is not hung, please raise the flag to the top.
2021-08-13
12
2021-04
Application common sense of anti-collision lifting column!
Application common sense of anti-collision lifting column! In order to maintain the order in front of the entrance and exit, anti-collision devices are placed at the entrance and exit. As a kind of traffic facility that prevents vehicles from forcibly entering and blocking and clearing in and out of vehicles, the anti-collision lifting column effectively enhances the safety of important security areas. It is the vision of each of our security personnel to provide a safe and reliable line of defense for people's safety. In our opinion, the important role of security products is to prevent uncontrollable dangerous factors in the future. In recent years, the level of research and development of domestic security products has been greatly improved, from traditional fences to security. Up to now, intelligent infrared anti-intrusion equipment, intelligent perimeter alarm linkage equipment, intelligent anti-collision lifting column equipment and so on. 1. Conventional interception: The lifting column is usually in the interception state. When there is a vehicle that needs to pass, only the control center gives valid instructions (card reading, remote control, license plate recognition, smart phone, manual button of the duty officer, etc.), the lifting column will It will lower and open the passageway to let the vehicle pass; after the vehicle passes, the sensor will automatically raise the anti-collision pillar to intercept the passageway after the vehicle has passed through, or raise the anti-collision pillar to intercept the passage through remote control, smart phone, manual button of the duty officer, etc. Channel port. 2. Automatic interception of illegal intrusion: The anti-collision lifting column is usually in a traffic state, and is connected to the control center through the anti-collision column interface. When vehicles with illegal intrusion or impact enter, the anti-collision column will automatically rise quickly. Carry out timely and effective interception of vehicles. Under normal circumstances, vehicles that need to enter a crossing must pass through valid identity authentication and security inspections, and vehicles that have completely passed the security inspection and have been approved by security personnel or have valid identity authentication (such as card reading, remote control, license plate recognition, smart phones, etc.) can pass The anti-collision lifting column safely enters the crossing. When the vehicle entering the crossing attempts to pass through without the security personnel's release instruction or invalid identity authentication (such as card reading, remote control, license plate recognition, smart phone, etc.), the anti-collision lifting column This vehicle will be regarded as an illegal vehicle and will automatically bounce the anti-collision lifting column to intercept it. 3. Perfect protection measures: The lifting column has perfect safety protection measures. The lifting column is designed with a variety of protection measures in the anti-collision area. When normal vehicles pass the anti-collision column, ensure that the roadblock machine will not automatically bounce up and make it normal The vehicle can pass smoothly and safely. 4. Emergency system: The anti-collision lift can be conveniently controlled by the central control system to lower the anti-collision column after a power failure, and the anti-collision lift column can also be raised by manual control, and the passage is urgently closed. Can effectively manage the channel port.
2021-04-12
12
2021-04
Is the road bumper paint reflective paint?
Is the road bumper paint reflective paint? The anti-collision pillars on the road are also called warning piles and protective piles, which belong to traffic safety equipment and are divided into fixed and movable types. The fixed-position anti-collision pillars that are common on the road generally use reflective film to paste the light, so wear and defects are common. In fact, a better way is to apply reflective paint, which is a kind of paint that has good adhesion to metal columns and concrete anti-collision columns. The only thing I can see is paint painted on the anti-collision pillar, which is all reflective paint, because ordinary paint does not have a reflective effect. I also won’t paint with fluorescent paint, because the fluorescent light automatically emits light in the dark at night, even if there is no light source, it will be more scary. Think about the dim surroundings and the faint light from a few pillars at night. Anti-collision pillars painted with reflective paint are suitable for road entrances and exits, highways, traffic divisions, etc. One is that such places are prone to safety accidents, and the other is that different areas need to be separated. Commonly used reflective paint patterns are yellow and black, red and white, and blue and white.
2021-04-12
12
2021-04
Why install a fully automatic lifting column?
Why install a fully automatic lifting column? Next, our anti-terrorism lifting column manufacturer will show you the meaning of installing lifting columns. Due to the increasing awareness of counter-terrorism, everyone is paying more and more attention to the safety of equipment. Lifting column control equipment can be seen everywhere in Beijing, Shanghai, Qingdao and other places, especially in government agencies, hospitals, schools, judicial departments and other places with a large flow of people. And the entrances and exits of important units. With government policy requirements and encouragement, the popularization of lifting columns is imperative.
2021-04-12